| SPECIFICATIONS |
| |
| Engine |
| Make--John Deere 5030T |
| Displacement--186 cu. in. (3.0L) |
| Cylinders--5 |
| Gross horsepower--76 hp (56.9 kW) |
| Net horsepower--70 hp (52.2 kW) |
| Rated engine speed--2,800 rpm |
| Fuel capacity--24 gal. (91L) |
| |
| Performance |
| Tipping Load--5,000 lb. (2268 kg) |
| SAE-rated Operating Capacity--2,500 lb. (1134 kg) |
| ROC with optional counterweights--2,850 lb. (1293 kg) |
| |
| Breakout Forces |
| Boom--4,800 lb. (2177 kg) |
| Bucket with heavy-duty foundry--7,500 lb. (3402 kg) |
| Bucket with heavy-duty construction--5,300 lb. (2404 kg) |
| |
| Ground Speed |
| Single-speed--7.0 mph (11.3 km/h) |
| Two-speed, Low--6 mph (9.7 km/h) |
| Two-speed, high--11 mph (17.7 km/h) |
| Max. axle torque--5,680 lb.-ft. (7701 Nm) |
| Tractive effort--8,725 lbf (3958 kgf) |
| Operating weight--8,390 lb. (3806 kg) |
| |
| |
| Hydraulic Horsepower |
| Standard flow--40 hp (29.8 kW) |
| High flow--63 hp (47 kW) |
| |
| Transmission |
| Type--Servo-Hydrostatic |
| System high-pressure relief--5,250 psi |
| |
| Electrical System |
| Alternator Output--70 amps |
| Battery cold cranking amps--925 |
| |
| Dimensions |
| Length of bucket--115.5 in. (2934 mm) |
| Length w/bucket--138.5 in. (3518 mm) |
| Width without bucket--73.7 in. (1872 mm) |
| Height to top of ROPS--80.9 in. (2055 mm) |
| Height to hinge pin--125 in. (3175 mm) |
| |
| Dump Reach |
| Heavy-duty foundry bucket--34 in. (864 mm) |
| Heavy-duty construction bucket--41 in. (1041 mm) |
| Dump angle (at full height)--45 degrees |
| Bucket rollback (at ground)--35 degrees |
| Wheelbase--47.6 in. (1209 mm) |
| Ground clearance--9 in. (229 mm) |
| Angle of departure--27 degrees |
| Standard tire size--12x16.5 8 PR SKS |
| |
| JOHN DEERE STANDARD WARRANTY----ONE-YEAR UNLIMITED HOURS |
