| Riding Mower |
- Inspect belts for weat, adjust tension.
- Clean engine compartment.
- Replace spark plug(s), adjust gap.
- Inspect or replace air filter.
- Check battery voltage and continuity.
- Change and dispose of oil and replace filter.
- Grease axle and mower spindles.
- Test operation of brakes, carburetor, transmission.
- Sharpen blades. check balance and straightness to avoid vibration.
- Clean built-up debris from under mower deck.
- Test operation of safety systems.
- Check tire tread and pressure.
|
 |
| Walk-Behind Mower |
- Wipe off deck and engine shroud.
- Clean fuel vent cap.
- Inspect or replace air filter.
- Inspect or replace spark plug, adjust gap.
- Clean built up debris from under mower deck.
- Change and dispose of used oil and replace filer (if equipped).
- Check blade brake clutch.
- Lube rear axle bearings.
- Clean clippings and debris from mower and belt area. Replace belt cover.
- Inspect mower blade, sharpen or replace if necessary.
- Check blade for balance and straightness.
- Test overall operation of the mower.
|
 |
|
